Boschert Notchers

Lite Power Notcher

Eagle Power Notcher

The LITE Hydraulic Power Notcher
Special Features: 5/32 mild steel capacity 10 ga. stainless steel capacity 8-7/8 x 8-7/8 90° notch Front to back cutting to hold material against stop Milled bed surface for no float or stick operation 35 wide by 25 deep table with milled surface so material does not float or stick Front to back cutting Hi-Carbon, Hi-Chrome blades that overlap on the cutting edge to eliminate blade chipping Internal stop for shearing Two heavy-duty adjustable stops with 12 horizontal bars One engraved brass scale and T-slot parallel to each blade Moveable electric foot pedal 50 strokes per minute (adjustable) Solid state circuitry Jog, single or continuous mode 4.5 horsepower motor
Boschert-LITE table detail (Picture shows plexi guard removed for better detail)

 

 

BOSCHERT Patented Quality
The patented Boschert TRI-GIDE™ system gives all Boschert notching machines the greatest accuracy and durability of any notcher made today. TRI is for the three large guiding cylinders. Two cylinders are in the top of the machine, close to the blades, the third is in the base and fully integrated with the hydraulic piston. GIDE is for the precise vertical travel of the ram. Torque from cutting heavy material is distributed evenly to all three cylinders.
TRI-GIDE™ Eliminates: Blade clearance adjustment for different material thicknesses Frequent blade sharpening due to sloppy guiding Uneven wear, and replacement problems with traditional guiding systems
Exclusive TRI-GIDE™ Benefits: Long blade life due to precise, rigid ram guiding Burr-free cuts on all gauges (within capacity) Off-center loading - 1 x 6 notch is no problem

TRI-GIDE™ is just part of the overall quality and ingenuity that goes into every Boschert Notcher. Other features include: Front-to-Back cutting - holds material against stops Milled table surface - keeps material from sticking Hi-Carbon Hi-chrome Blades - overlap on the cutting tip to eliminate blade chipping Thousands of machines installed in North America Parts for all machines ever built are available
Patented Combination Horizontal Hold-down and Stop Bar

 

 

 

The EAGLE and EAGLE 250 Hydraulic Power Notcher
Special Features: 1/4 mild steel capacity 3/16 stainless steel capacity 8-7/8 x 8-7/8 90° notch Front to back cutting to hold material against stop Milled bed surface for no float or stick operation 35 wide by 25 deep table with milled surface so material does not float or stick Front to back cutting Hi-Carbon, Hi-Chrome blades Internal stop for shearing Two patented 12 combination horizontal hold down and stop bars Engraved brass scales Moveable electric foot pedal Adjustable stroke, 50 per minute Solid state circuitry Jog, single or continuous mode 6.5 horsepower motor Scrap bucket
Additional features of the Eagle 250: Two material hold downs Special blade guard

BOSCHERT Patented Quality
The patented Boschert TRI-GIDE™ system gives all Boschert notching machines the greatest accuracy and durability of any notcher made today. TRI is for the three large guiding cylinders. Two cylinders are in the top of the machine, close to the blades, the third is in the base and fully integrated with the hydraulic piston. GIDE is for the precise vertical travel of the ram. Torque from cutting heavy material is distributed evenly to all three cylinders.
TRI-GIDE™ Eliminates: Blade clearance adjustment for different material thicknesses Frequent blade sharpening due to sloppy guiding Uneven wear, and replacement problems with traditional guiding systems
Exclusive TRI-GIDE™ Benefits: Long blade life due to precise, rigid ram guiding Burr-free cuts on all gauges (within capacity) Off-center loading - 1 x 6 notch is no problem

TRI-GIDE™ is just part of the overall quality and ingenuity that goes into every Boschert Notcher. Other features include: Front-to-Back cutting - holds material against stops Milled table surface - keeps material from sticking Hi-Carbon Hi-chrome Blades - overlap on the cutting tip to eliminate blade chipping Thousands of machines installed in North America Parts for all machines ever built are available
Patented Combination Horizontal Hold-down and Stop Bar